Wipers are exposed to extreme conditions daily, if weather, dirt, insect remains or friction on the disc. Two young inventors had an idea and developed a device with which it is possible to renew old worn wiper directly on the vehicle. The sometimes expensive purchase new wiper can thus be postponed for the time being. auto.de tested the ECOCUT pro, the puller for old wipers.
Admittedly a bit skeptical, I was, when I held the ECOCUT per for the first time in his hands. However, the quality finish and feel of the device convinced me. In short, I studied the instructions for use. After over a year in use, it had to be renewed my windshield wipers required.
Following the instructions, I cleaned the beginning the wiper with the supplied sponge. Since I use the ECOCUT per for the first time with my wipers, I chose the lead 1 to push the device to the wiper lip. There hooked slightly until I could position the ECOCUT per final. With a slight pressure to the device, the blade slides along the rubber. And the second wiper I cut off in the same way. But here I must complain that stopped a small "rubber nose" in both wipers.After re Ansetzten of the device, this however could remove. Likewise, Schneider worked at the rear wiper. Now I was looking forward to the outcome of wiping. The result perfectly, no stripes.
The cost for windshield wipers are different. Ironing or Flachbalkenwischer cost between 15.00 EUR and 42.00 EUR. Standard wipers are already available from 8,00 EUR. Original wiper by the vehicle manufacturer are of course much more expensive.
And so the ECOCUT pro a cheaper alternative to complete replacement of the wiper blades. The wiper can be renewed twice with the hook, so then the acquisition of ECOCUT per amounting of 15.95 EUR pays off. In addition, the blade according to the manufacturer stands firm around 20 applications and 10 vehicles, so the ECOCUT can be used per several times. In short, an inventive idea that works. auto.de wishes the team ECOCUT per every success!
The ECOCUT per available directly in the shop at: http://www.ecocut-pro.de/